Common Car Stereo Problems And Solutions

Every system has some complexity in it which can arise anytime and hamper the proper functioning of that particular system. One of the best ways to avoid this problem is to always use high-quality materials. Using high-quality materials ensures that the system would function free of complexity for a longer time. These problems show up due to a number of reasons, using low-quality materials is the basic reason as the material used in it is not able to sustain the quality of sound required by us. Another reason is if components are used without proper servicing then chances are high that they may cause some problem.

The next reason may include the installation as sometimes when proper installation of the system is not done then it might cause problems. The most common problem that arises is when the car radio stops working. It occurs because of failure in the proper power supply or when wiring is not done properly. Almost all car systems come with a fuse and when there is some change in power the fuse blows, if the fuse is blown then current won’t be able to flow and radio would not work properly. One might also conquer a problem in which speakers fail to produce the required bass, this occurs when one speaker works normally i.e. push air while the other one pulls air and hence required bass is not produced, this problem can occur during up-gradation or installation of speakers.

One might encounter unwanted noises from the stereo system which disturbs the driver and can be irritating sometimes. There are various sounds produced which include Alternate whine, it occurs when the ground is not properly chosen or due to poor connections between several components. It can be easily corrected by properly grounding the system, another sound is Accessory pop, components that draw high currents cause this type of noise and it can be corrected by using a bipolar capacitor. This problem always occurs in a system as some connections can never be perfect so it is advisable to use high-quality materials so that it can be minimized.

Problems can also occur due to overheating of some components. Sound can suddenly cut off as the amplifier overheats when a lot of loading is done or when there is no proper air flow. Music can be played with any intensity so this problem needs to be corrected by providing proper space for air flow so that amplifier remains cool. The stereo should also be kept cool by checking the wires properly during installation. The last problem that may arise is related to the head unit when it fails to receive 12V of the power supply which may occur to newly installed systems. This problem should be checked during the installation with the help of a voltmeter by checking the voltage across head unit initially and if it is not 12 V then replacing it.

These problems are not that common unless and until they are properly checked and precautions are taken beforehand. For our system to have a long life we must consider these problems as well and make our system more efficient.

You can also check our post on how to prevent your car amplifier from heating up by clicking here.